• Eng
  • Рус

Наверх

ELM-ACS

ELM-ACS frequency converters are intended for low voltage motors speed and torque control

Purpose

Electric drives are widely used across various industries, power and utility sectors with pumps, fans, compressors, conveyors, belt conveyors and other motor based equipment involved.

Applications

Electric drives are widely used across various industries, power and utility sectors with pumps, fans, compressors, conveyors, belt conveyors and other motor based equipment involved.

Special features

  • Direct torque control (DTC) technology application

This technology, developed by ABB, features precise control and considerable energy savings.

  • Standard configuration of converter provides various features:

Embedded choke ensures no error is made when ordering a converter and, as a consequence, long-term and reliable operation in poor grids are ensured – Both braking choppers and brake resistors can be integrated to converters (which is the case for devices of limited power range) – Wide range of macros allows to arrange a drive to any application, whilst an embedded programmable logic controller makes it possible to resolve sophisticated tasks – Software configuration assist feature reduces time of commissioning – Standard application software fits well almost all applications

  • Special versions are available for, e.g. marine applications and drilling platforms
Drive Model type Power range (kW) Input voltage (V) Drive type
ACS 55 0.18-2.2 1 phase, 110...120 V or 200...240 V, +10/15% Component drive
ACS150 0.37-4 1-phase, from 200 to 240 V ±10 % from 0.37 to 2.2 kW (from 0.5 to 3 hp) 3-phase, from 200 to 240 V ±10 % from 0.37 to 2.2 kW (from 0.5 to 3 hp)
3-phase, from 380 to 480 V ±10 % from 0.37 to 4 kW (from 0.5 to 5 hp)
Component drive
ACS310 0.37-22 3-phase, 200 - 240 V ± 10% 0.37-11 kW (0.5-15 hp)

3-phase, 380 - 480 V ± 10% 0.37 - 22 kW (0.5-30 hp)
Drives for equipment with alternating torque (pumps, fans etc.)
ACS350 0.37-22 1-phase, from 200 to 240 V ±10 % from 0.37 to 2.2 kW (from 0.5 to 3 hp)

3-phase, from 200 to 240 V ±10 % from 0.37 to 11 kW (from 0.5 to 15 hp)

3-phase, from 380 to 480 V ±10 % from 0.37 to 22 kW (from 0.5 to 30 hp)
For general purpose gears
АСН550 0.75-355 3-phase, 380...480 V, +10/-15 %, (0.75...355 kW)

3-phase, 208...240 V, +10/-15 %, (0.75..0.75 kW)

1-phase, 208...240 V,+10/-15%, (de-rating by 50%)

Automatic mains voltage detection
Drives for HVAC systems
ACS550 0.75-355 3-phase, 380...480 V, +10/-15 %, (0.75..-355 kW)
3-phase, 208...240 V, +10/-15 %, (0.75..-75 kW)
Automatic mains voltage detection
Standard drive
ACS800 ACS800-01
ACS800-02
ACS800-04
ACS800-07
ACS800-07LC
ACS800-11
ACS800-17
ACS800-31
ACS800-37
Up to 200
Up to 560
Up to 1900
Up to 2800
200-5600
Up to 110
Up to 2500
Up to 110
Up to 2700
3-phase, U2IN= from 208 to 240 V.
±10 %.
except - 07, -07LC,-17, -
37
З-phase, U3IN= from 380 to 415 V. ±10%
3-phase, U5IN= from 380 to 500 V, ±10 %
3-phase, U7IN= from 525 to 690 V,
±10 % (600 V: UL, CSA)
Wall-mount drive
Floor-mount drive
Module type drive
Cabinet-built drive
Liquid-cooled drive
Wall-mount regenerative drive
Cabinet-built regenerative drive
Wall-mount low harmonic drive
Cabinet-built low-harmonic drive
ACSM1 ACSM1-04 0.75-160 3-phase, from 380 to 440 V ± 10% Precision motion control drive

Мы соблюдаем требования стандартов ведения безопасной деятельности

Конференция_АО_Электронмаш